| | [AludePure] Water Treatment for Anodizing and Powder Coating
[AludePure] Water Treatment for Anodizing and Powder Coating 2019-01-10T10:03:20+00:00

AludePure

Waste Water Treatment Plant specific for Anodizing and Powder Coating lines

A Water Treatment Solution adapted to the needs of your installation

AludePure AN

SULPHATES
RESULT
AludePure AN (Standard) 2500-1500 ppm
AludePure AN S 1500-1000 ppm
AludePure AN S + 1000-300 ppm

AludePure is a system for the treatment of residual effluents and the discharge of concentrates, resulting from facilities for the treatment of aluminum surface.

AludePure Control. Software de gestión de parámetros y estado

With capacities ranging from 8,000 to 15,000 liters / hour in the case of anodizing installations and from 2,000 to 6,000 in the case of powder coating lines, these systems allow reaching very low concentrations, of sulfates in one case and fluorides in the other, with results adapted to the needs of the client for the fulfillment of the environmental regulations from each country.

AludePure PC

FLUORIDE
RESULTS
AludePure PC(Standard) 25-20 ppm
AludePure PC + 20-10 ppm
AludePure PC + F 10-3 ppm

AludePure AludePure is a system for the treatment of residual effluents and the discharge of concentrates, resulting from facilities for the treatment of aluminum surface.

AludePure Control. Software de gestión de parámetros y estado

With capacities ranging from 8,000 to 15,000 liters / hour in the case of anodizing installations and from 2,000 to 6,000 in the case of powder coating lines, these systems allow reaching very low concentrations, of sulfates in one case and fluorides in the other, with results adapted to the needs of the client for the fulfillment of the environmental regulations from each country.

AludePure AN

SULPHATES
RESULT
AludePure AN (Standard) 2500-1500 ppm
AludePure AN S 1500-1000 ppm
AludePure AN S + 1000-300 ppm

AludePure PC

FLUORIDE
RESULTS
AludePure PC(Standard) 25-20 ppm
AludePure PC + 20-10 ppm
AludePure PC + F 10-3 ppm